Difference between revisions of "Data Processing"
| Line 15: | Line 15: | ||
Here is a more sophisticated example: | Here is a more sophisticated example: | ||
| − | + | This is a an example file to read NE data. First we load the file - change the filename below as needed. The file should be in the Matlab working directory in this case: | |
| − | |||
| − | |||
>> d=load(‘20120731153351_enobiodata.easy’); | >> d=load(‘20120731153351_enobiodata.easy’); | ||
| − | + | Next we define the time axis using the last column in the data (in ms Unix time): | |
| − | time=d(:,end); % time stamp is in the last column - in ms Unix time | + | >> time=d(:,end); % time stamp is in the last column - in ms Unix time |
| − | time=time-time(1); % set clock to zero in first sample | + | >> time=time-time(1); % set clock to zero in first sample |
| − | time=time/1000; % change time units to seconds | + | >> time=time/1000; % change time units to seconds |
| − | + | Example one: we plot channel 1 in mV | |
| − | figure(1); plot(time, d(:,1)/1e6); % divide by one million to go to mV | + | >> figure(1); plot(time, d(:,1)/1e6); % divide by one million to go to mV |
| − | xlabel(‘Time from start (s)’); | + | >> xlabel(‘Time from start (s)’); |
| − | ylabel(‘Voltage (mV)’); | + | >> ylabel(‘Voltage (mV)’); |
| − | title(‘Channel 1 data’); | + | >> title(‘Channel 1 data’); |
| − | + | Example two: we plot channels 1 to 8 in uV | |
| − | figure(2); plot(time, d(:,1:8)/1e3); % divide by one thousand to go to uV | + | >> figure(2); plot(time, d(:,1:8)/1e3); % divide by one thousand to go to uV |
| − | xlabel(‘Time from start (s)’); | + | >> xlabel(‘Time from start (s)’); |
| − | ylabel(‘Voltage (uV)’); | + | >> ylabel(‘Voltage (uV)’); |
| − | legend({‘Ch1’,’Ch2’,’Ch3’,’Ch4’,’Ch5’,’Ch6’,’Ch7’,’Ch8’}); | + | >> legend({‘Ch1’,’Ch2’,’Ch3’,’Ch4’,’Ch5’,’Ch6’,’Ch7’,’Ch8’}); |
| − | title(‘Channels 1-8 data’); | + | >> title(‘Channels 1-8 data’); |
| − | ylim([-200 200]); % fix the y-axis limits to plu/minus 200 uV | + | >> ylim([-200 200]); % fix the y-axis limits to plu/minus 200 uV |
Revision as of 12:21, 10 October 2013
In this page you will find some tips on how to analyze NE instrument data. This includes EEG data and accelerometry.
We discuss data analysis with Matlab and with NIC-Offline
Matlab tools
When EEG data is recorded by NIC from Enobio or StarStim instruments, several files are created. These include an .info file and an .easy file. "Easy" format data is, well, easy to load into a program such as Matlab. Here is an example in Matlab:
>> MyData= load('201320020020data.easy');
Here is a more sophisticated example:
This is a an example file to read NE data. First we load the file - change the filename below as needed. The file should be in the Matlab working directory in this case:
>> d=load(‘20120731153351_enobiodata.easy’);
Next we define the time axis using the last column in the data (in ms Unix time):
>> time=d(:,end); % time stamp is in the last column - in ms Unix time
>> time=time-time(1); % set clock to zero in first sample
>> time=time/1000; % change time units to seconds
Example one: we plot channel 1 in mV
>> figure(1); plot(time, d(:,1)/1e6); % divide by one million to go to mV
>> xlabel(‘Time from start (s)’);
>> ylabel(‘Voltage (mV)’);
>> title(‘Channel 1 data’);
Example two: we plot channels 1 to 8 in uV
>> figure(2); plot(time, d(:,1:8)/1e3); % divide by one thousand to go to uV
>> xlabel(‘Time from start (s)’);
>> ylabel(‘Voltage (uV)’);
>> legend({‘Ch1’,’Ch2’,’Ch3’,’Ch4’,’Ch5’,’Ch6’,’Ch7’,’Ch8’});
>> title(‘Channels 1-8 data’);
>> ylim([-200 200]); % fix the y-axis limits to plu/minus 200 uV
